


Torn mesh, loose corners, and frames that sag in the middle all mean your window screens need repair. In Boise, that damage shows up faster than most homeowners expect, mainly because of our dry heat and wide temperature swings. The good news is that most screens can be fixed rather than replaced, and usually in one visit.
Your screens do real work. They keep dust, pollen, and bugs out while fresh air moves through your house. So when they fail, you either keep the windows shut all season or let debris pour in.
Why Boise Screens Wear Out So Fast
Boise screens fail early because of heavy sun exposure, dry heat, and blowing dust. Our high desert climate puts mesh and frames through more stress in a single year than a milder climate does in two or three.
Three things work against your screens at once:
- Sun: Boise averages roughly 120 clear days a year, plus about 90 partly cloudy ones, according to climate data shared by Boise State University. That much UV exposure breaks down vinyl-coated mesh until it turns brittle and cracks.
- Dust and Pollen: Spring winds pack the mesh with fine grit, which adds weight to material that is already weakened.
- Temperature Swings: Frames expand on 95-degree afternoons and contract on freezing nights, which slowly loosens the corner joints.
This is not just an older home problem, either. Plenty of newer houses in Meridian, Eagle, and Kuna come with standard-grade mesh that was never made for this much sun, so professional screen repair becomes a need within just a few years.
Signs You Need Window Screen Repair
Look for tears, loose corners, sagging mesh, and frames that no longer sit flush in the track. Screen damage builds slowly, so most homeowners miss it until a bug gets in or a screen pops out of its channel.
Walk your home and check for these:
- Tears, holes, or fraying mesh, even small ones
- Corners that feel loose, cracked, or brittle
- Mesh that bows outward or sags in the middle
- Frames that no longer sit flush in the window track
- Gritty buildup that will not brush away
- Bent or dented aluminum edges from wind or impact
If you spot two or more of these, a quick patch probably will not hold for long. For a closer look at where the line falls, our guide to repairing versus replacing screens walks through each scenario.
Repair or Replace: What Makes Sense
Most screens only need fresh mesh, so full replacement is rare. Here is how the common problems usually get handled.
| What is Wrong | Typical Fix | Why |
|---|---|---|
| Torn or stretched mesh | Re-mesh the existing frame | The frame is still sound, so only the screen material needs swapping |
| Cracked plastic corners | Replace corner hardware | New metal tabs hold the frame square again |
| Slight frame bend | Straighten on site | Aluminum usually flexes back without damage |
| Badly warped or crushed frame | Build a new frame | A twisted frame will never seal in the track |
| Wrong size from a past repair | Measure and rebuild | A properly sized frame stops rattling and gaps |
What Happens During a Mobile Screen Repair Visit
A mobile repair happens right at your house, often in under an hour. Rather than hauling fragile frames to a hardware store and guessing at mesh color, you get the work done in your own driveway.
Here is how a visit usually goes:
- We remove the damaged screens from their tracks.
- We measure each frame and check the corners for cracks.
- We cut and stretch fresh mesh to fit.
- We straighten light bends and swap brittle plastic corners for metal tabs.
- We reinstall every screen and make sure it seats flush.
Since we are already on site, many homeowners pair the repair with residential window washing so the glass and screens both come out clean on the same day. We handle screen repair across Boise, Meridian, and Eagle.



Upgrading to UV-Resistant Mesh and Metal Corners
Yes, upgrading is worth it, especially on south- and west-facing windows. UV-resistant mesh resists the brittleness that causes cracking after a few Treasure Valley summers, and metal corner tabs hold up far better than plastic through our freeze and thaw cycles.
Together, those two upgrades fix both common failure points at once. As a result, you spend less on repeat repairs over the next several years.
Fall is also a smart time to handle this. Your screens just took a beating all summer, and fixing them now means they are ready before spring pollen arrives. Since the same dust and minerals also build up on your glass all season, many homeowners knock out both jobs in one appointment.
FAQs About Window Screen Repair
How long does window screen repair take?
Most repairs finish within the same visit, often in under an hour depending on how many frames need work.
Can a damaged frame be repaired, or does it need replacing?
It depends on the damage. We can straighten minor bends and replace cracked corner hardware, but a badly warped frame needs to be rebuilt.
Is UV-resistant mesh worth the extra cost in Boise?
Yes, particularly for windows that get direct afternoon sun. It resists the brittleness that leads to cracking, which is the most common failure we see here.
Do you repair screens outside of Boise?
Yes. Mobile screen repair is available throughout Boise, Meridian, Eagle, Kuna, Nampa, Caldwell, and Garden City.
Schedule Your Screen Repair With Raw Window Cleaning
Ready to get your screens working again before the next season change? Call Raw Window Cleaning at (208) 995-9869 or book an appointment online, and we will get you a free estimate within 24 hours. We are a family-owned, licensed, and insured team serving the Treasure Valley, and we are happy to look at every screen on your home in a single visit.





































